PI Expert Online
PI Expert Online
PI Expert Online允许电源设计师输入规格参数,然后可自动生成围绕Power Integrations某一IC产品系列的电源转换方案。PI Expert Online可提供构建和测试工作原型所需的所有必要信息,包括完整电路原理图、物料清单(BOM)、电路板布局建议以及详细的电气参数表。
PI Expert Online还可提供完整的变压器设计,包括磁芯尺寸、线圈圈数、适当的线材规格以及每个绕组所用的并绕线数。此外,还可生成详细的绕组机械装配说明。
PI Xls Designer已集成到PI Expert Online中,PI Xls Designer是基于设计表格的应用程序,能让电源设计师在设计过程中获得更多的控制。同时,也提供包括详细的绕组机械装配说明在内的变压器构建支持。PI Xls Designer根据您提供的有关输入、输出以及其他所有必需的规格参数来执行必要的计算,以设计和评估电源转换方案。
观看共三集的PI Expert Online线上座谈: 上集:PI Expert Online入门 |
2.3.5 版新功能
- LYTSwitch-6 update with new part numbers (feature codes)
- Added ability to allow second (parallel) SR-FET on the output
- Transformer construction now supports Parallel Wound Secondary
- PIXls Design now supports Litz Wire in Transformer Construction
- PI Device database update with additional part numbers (feature codes) and current limit dependency
- Update to InnoSwitch-3 bias calculations
- Update to high output voltage design rules for InnoSwitch3
- Update to guidance for using VOUT-Pin Linear Regulator - PI Xls Spreadsheets update to InnoSwitch3-CE, InnoSwitch3-CP, InnoSwitch3-EP, InnoSwitch3-Pro, 900 V InnoSwitch3-EP and InnoSwitch3-AQ
2.3.4 版新功能
- PI Expert now supports Litz Wires
- DC-DC LYTSwitch-6 now supports Design Evaluation in PI Expert
- Calculation Engine updates
- For InnoSwitch-3 Flyback spreadsheets,
- Interactive Design Evaluation feature for InnoSwitch3-CE/EP/CP/Pro and spreadsheets
- Updates to InnoSwitch3-EP/CP/Pro with Size 8 GaN devices - Minor updates to TOPSwitch-JX Flyback spreadsheet
2.3.3 版新功能
- PI Expert now supports CAPZero-3
- PI Expert Online new Look and Feel Phase 1 - Quick links to product documents and new design for components selection
- New performance-optimizing bias winding circuit calculations for InnoSwitch3 Family
- Minor updates to InnoMux and InnoSwitch3-MX spreadsheet
2.3 版新功能
- PI Expert now supports DC Input for LYTSwitch-6 product family
- New features in PI Expert Online
- Enables freezing of components prior to optimization
- Component Database now includes new Surface Mount parts
- InnoSwitch3-CP and InnoSwitch3-Pro have a new bias winding circuit calculation for optimizing design performance
- For all InnoSwitch-3 family devices:
- Interactive Design Evaluation Report
- Updated Clamp calculations
- PIXls now supports LinkSwitchTN2-900V Buck Boost
- Improvements in PI Expert Online performance and stability
2.2.10 版新功能
- Updates to InnoSwitch-CH/CE/EP/EP 900V Flyback spreadsheets
- Updates to LYTSwitch-6 Flyback and Switched Valley-Fill PFC with Flyback spreadsheets
2.2.9 版新功能
- Updates to InnoMux and InnoSwitch3-MX spreadsheet
- Bug fixes
2.2.8 版新功能
- New features in PI Expert Online:
- InnoSwitch-3 EP/CP/Pro now include additional parts with breakdown voltage of 750 V
- CAPZero support
- Calculation and Optimization Engine update for InnoSwitch3 families
- Magnet wire database update
- PI Xls now supports InnoMux and InnoSwitch3-MX Chipset
- Minor updates to InnoSwitch-CP Flyback spreadsheet
- Bug fixes
2.2.7.14 版新功能
- Updates to PIXls InnoSwitch-3 EP/CP/Pro Flyback spreadsheets – Additional parts with breakdown voltage of 750V added to the spreadsheets
2.2.7 版新功能
- Updates to PIXls LYTSwitch-6
- Major updates to Transformer Engine for all families – Support uneven primary winding split and other enhancements which provides superior transformer optimization
- PI Xls now supports InnoSwitch3-EP 900V Flyback and LinkSwitchTN2-900V Buck spreadsheets
- Major update to HiperPFS-4 Boost spreadsheet
- Bug fixes
2.2.6 版新功能
- Minor updates to LinkSwitch-TN2 in Buck Boost topology
- Transformer Engine now supports Flying Leads
- Bug fixes
2.2.5 版新功能
- Minor updates to InnoSwitch3-EP Flyback spreadsheet
- Minor updates to HiperTFS-2 spreadsheet
- Enable Exhaustive Search Optimization method for InnoSwitch3-CP and InnoSwitch3-Pro
- Enhancements in PI Expert Online: added more High Voltage Ceramic capacitors to Component Database; improved Post Filter Circuit components selection; and updated new Design Notifications
- Bug fixes
2.2.4 版新功能
- PI Xls now supports TinySwitch-LT in Flyback topology
- Minor updates to LinkSwitch-HP Flyback spreadsheet
- Added Current Sense Circuit Slope components to InnoSwitch3-Pro
2.2 版新功能
- PI Expert now supports InnoSwitch-3 CP/PRO
- Improvements in PI Expert Online performance and stability
了解详情...观看视频!
PI Expert Online支持的Web浏览器
浏览器 | 版本* | 支持 | 有限支持** |
---|---|---|---|
Internet Explorer | 11 | X | |
10 | X | ||
9 | X | ||
Google Chrome | >33 | X | |
Firefox | >28 | X | |
Opera | 20 | X | |
Safari | >5.17 | X |
*PI Expert Online将会对以上浏览器的后续新版本提供支持。
** PI Expert要求采用HTML5技术。旧版浏览器可能无法完全兼容。
设计软件支持概览
设计软件支持的 PI产品 | PI Expert | PI Xls |
---|---|---|
DPA-Switch | X1 | X2 |
HiperLCS | X5 | |
HiperPFS | X6 | |
HiperPFS-2 | X6 | |
HiperPFS-3 | X6 | |
HiperPFS-4 | X6 | |
HiperTFS-2 | X7 | |
InnoSwitch3-CE | X1 | X1 |
InnoSwitch3-CP | X1 | X1 |
InnoSwitch3-EP | X1 | X1 |
InnoSwitch3-Pro | X1 | X1 |
InnoSwitch3-MX & InnoMux | X1 | |
InnoSwitch-CE | X1 | |
InnoSwitch-CH | X1 | |
InnoSwitch-CP | X1 | |
InnoSwitch-EP | X1 | |
LinkSwitch-II | X3 | |
LinkSwitch-3 | X1 | |
LinkSwitch-4 | X1 | |
LinkSwitch-CV | X1 | X3 |
LinkSwitch-HP | X1 | X1 |
LinkSwitch-LP | X1 | |
LinkSwitch-PH | X1 | X8 |
LinkSwitch-PL | X1 | X15 |
LinkSwitch-TN | X4 | |
LinkSwitch-TN2 | X4 | |
LinkSwitch-XT | X1 | X1 |
LinkSwitch-XT2 | X1 | |
LinkZero-AX | X1 | |
LinkZero-LP | X1 | |
LYTSwitch-0 | X12 | |
LYTSwitch-1 | X16 | |
LYTSwitch-2 | X1 | |
LYTSwitch-3 | X10 | |
LYTSwitch-4 | X13 | |
LYTSwitch-5 | X14 | |
LYTSwitch-6 | X18 | |
LYTSwitch-7 | X12 | |
TinySwitch-III | X1 | X1 |
TinySwitch-4 | X1 | X1 |
TinySwitch-LT | X1 | |
TOPSwitch-HX | X1 | X1 |
TOPSwitch-JX | X1 | X1 |
注释:
- 仅支持反激式拓扑结构
- 同时支持反激式和正激式拓扑结构
- 同时支持反激式和抽头降压拓扑结构
- 支持反激式、降压式和降压-升压拓扑结构
- 支持LLC谐振拓扑结构
- 支持升压拓扑结构
- 支持双管正激拓扑结构
- 支持反激式和降压式拓扑结构设计
- 支持反激式、抽头降压、降压和降压-升压式拓扑结构设计
- 支持反激式、降压、升压、降压-升压式和抽头降压-升压拓扑结构
- 同时支持反激式、降压和抽头降压拓扑结构
- 支持降压式拓扑结构
- 支持反激式、降压式、降压-升压式和抽头降压拓扑结构
- 支持反激式、降压式、升压式、降压-升压式和抽头降压-升压拓扑结构
- 支持反激式、降压式、升压式、降压-升压式和抽头降压拓扑结构
- 支持降压式、降压-升压式拓扑结构
- 支持反激拓扑开关填谷式PFC拓扑结构
- 支持反激式、反激拓扑开关填谷式PFC拓扑结构